- 1.12 -
Precautions in handling the medium
Carefully observe the following when handling the medium.
• Use media recommended by MIMAKI for stable, high-quality plotting.
• Heater temperature setting according to medium characteristics
Set the temperature of the preheater and print heater according to the type
and characteristic of the medium used. Automatic temperature setting can
be made from the operation panel through profile specification from the
dedicated RIP.
• Expansion and contraction of the medium
Do not use medium immediately after unpacking. The medium can expand
and contract due to the room temperature and humidity.
The medium have to be left in the atmosphere in which they are to be used
for 30 minutes or more after unpacked.
• Curled medium
Avoid the use of curled medium. They can be a cause of a medium jam.
If regular-sized coating medium is stored with rolled, the coating face has to
face outside.
To Next Page
Loading...
