MIMAKI JV3-160S User Manual

- 1.7 -
Heater panel
The platen has heater built-in for printing and pre-printing. Turns on/off the power of the heaters and
displays their statuses with LED indicators. When the power switch of the device is turned off, the
power of the heaters is also turned off.
HEAT indicator
Lights in orange while the
print heater is being heated.
CONSTANT indicator
Lights in green when the
temperature of the print heater
reaches the set temperature.
CONSTANT indicator
Lights in green when the
temperature of the print heater
reaches the set temperature.
Heater power switch
Turns on/off the power of the
heaters
• The HEAT indicator may go off while the CONSTANT indicator is lighting.
This is not an error but an indication that the temperature of the print heater
have reached the set temperature and heating is interrupted.
HEAT indicator
Lights in orange while the
print heater is being heated.

MIMAKI JV3-160S Specifications

General

Brand	MIMAKI
Model	JV3-160S
Category	Printer
Language	English