MIMAKI JV3-160S - Paper Jamming Arises;Medium Is Soiled; The [HEAT] or [CONSTANT] Indicator Does Not Go on

- 6.3 -
Paper jamming arises/medium is soiled
A jam of the medium or a stained medium is considered to occur when an unsuitable medium is used
or the medium is set improperly.
Are you using medium specific
to the device?
Yes
Are you using medium that has
neither curls nor bent ends?
Yes
Does the medium hang over along
the platen?
Use medium specific to the
device.
Avoid medium that has curls or
bent ends.
Use a take-up device or re-load
the medium on the device.
page 2.10, 2.16
No
No
No
The [HEAT] or [CONSTANT] indicator does not go on
Check the basic operation.
Is the power of the device ON?
Yes
Is the power of the heater ON?
Yes
Is the heater temperature setting
effective?
Turn on the power of the device.
page 2.3
Turn on the power of the heater.
Set the temperature of the
heater.
page 2.18
No
No
No