- A.2 -
Basic specifications
Item JV3-160S
Printing head Method Piezo-electric drop-on demand
Specification 3-heads Inlines
Nozzle 180 nozzles for each color
Resolution 360, 540, 720, 1440 dpi
Drawing mode 360 x 360 dpi : 2 / 4 / 8 passes, Unidirection / bidirection
360 x 540 dpi : 3 / 6 / 12 passes, Unidirection / bidirection
360 x 720 dpi : 4 / 8 / 16 passes, Unidirection / bidirection
720 x 720 dpi : 4 / 8 / 16 passes, Unidirection / bidirection
720 x 1440 dpi : 8 / 16 / 32 passes, Unidirection / bidirection
1440 x 1440 dpi : 16 / 32 passes, Unidirection / bidirection
Delivery system of ink Supplies ink through a tube from ink cartridge
Remaining ink display function (IC mounted)
Ink end detecting function
Ink cartridge replacement system
Capacity of ink cartridge 220 cc ± 5 cc per cartridge
About 200 cc for each cartridge variable
Medium type Tarpaulin, FF, PVC
Max. printing 1440 x 1440 dpi : 1000 mm
width Normal Scan 1610 mm
High-speed Scan 1570 mm
Roll Medium Maximum 1620 mm
size Minimum 210 mm
Thickness 1.0 mm or less
Roll outside diameter
Ø 180 mm or less
Roll weight 25 Kg or less
Roll inside diameter 2 Inch, 3 Inch
Plotting surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the paper to be removed from the
core with ease.
Leaf medium Maximum 1620 mm
size Minimum 210 mm
Margin Leaf medium Left end and right end : 15 mm
Front : 65 mm
Rear : 110 mm
Margin Roll medium Left end and right end : 15 mm
Front : 25 mm
Rear : 0 mm
Distance Absolute accuracy Whichever the larger one of ± 0.3 mm or ±0.3 % of the designated
accuracy Reoroducibility Whichever the larger one of ± 0.2 mm or ±0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Medium skew 5 mm or less / 10 m variable
Head height adjustment 2.0 mm / 3 mm variable from the platen surface
Cutting of medium Cutting of Y direction by the head cutter,
Cutting accuracy(steps) : 0.5mm or less.
Medium delivery Take-up device as standard
(inside winding / outside winding selectable)
Waste ink tank Bottle type ( 2,000 cc [1pcs.])
Replacement timing is judged visually.
To Next Page
Loading...
