- 2.2 -
Operation
The following shows a series of operations and settings, ranging from power-on to end of plotting.
For details on each item, refer to the reference page.
Turn on the power on P. 2.3
Check the head height P. 2.6
Set the medium P. 2.8
Turn on the power of the heater
P. 2.18
Adjust the temperature
Plot the test pattern P. 2.20
Correct the medium feed rate P. 2.22
Start the plotting P. 2.25
Turn off the power P. 2.29
To Next Page
Loading...
