MIMAKI JV3-160S - Where to Install the Device

- 1.2 -
Where to install the device
Secure a suitable installation space before assembling the device.
The place of installation must have space required not only for the device itself but also for plotting
operation.
Model Width Depth Height Gross weight
JV3-160S 2470 mm 640 mm 1210 mm About 155 Kg
3470 mm
500 mm
1000 mm
1000 mm
2640 mm
500 mm
Working environmental temperature
This equipment should be used at 20-35
o
C to implement a stable print.
According to the surrounding temperature condition, the temperature may not rise to the set value.