- xii -
Regular wiping function [INT.WIPING] ............................................................................ 5.7
When medium thickness is changed [PRINT ADJUST] ................................................ 5.9
If nozzles are clogged even after the cleaning function is executed ........................ 5.11
[FILL UP INK] ..................................................................................................................................... 5.11
[WASH] ............................................................................................................................................... 5.11
Ink discharge way cleaning [Disway WASH] ............................................................... 5.13
Sleep cleaning [SLEEP clean] ....................................................................................... 5.15
When not in use the plotter over the long term [CUSTODYwash] ............................. 5.16
Drawing setup conditions [LIST] .................................................................................. 5.18
Plotting HEX CODE [DATA DUMP] ................................................................................ 5.19
Wiper Life warning [WIPE LEVEL] ................................................................................ 5.20
Setting time [TIME SET] ................................................................................................. 5.21
Displaying device information [INFORMATION] .......................................................... 5.22
Replace the cutter blade for cutting ............................................................................. 5.23
CHAPTER 6 When abnormal conditions are encountered
Before taking a phenomenon as a sign of failure ......................................................... 6.2
The device cannot be energized .......................................................................................................... 6.2
The device cannot perform printing ...................................................................................................... 6.2
Paper jamming arises/medium is soiled ............................................................................................... 6.3
The [HEAT] or [CONSTANT] indicator does not go on ......................................................................... 6.3
If image quality declines .................................................................................................. 6.4
While lines/thin spots are obvious or dark stripes occur (In the direction of travel of the head) .......... 6.4
Characters fluctuate doubly or triply into paper feed ............................................................................ 6.4
Displacement is observed between outward and inward printing ........................................................ 6.4
The respective color ink injected by the respective color heads do not properly overlap .................... 6.4
Large ink drop on medium .................................................................................................................... 6.4
Troubles for which error messages are given on the LCD ........................................... 6.5
Errors accompanied by warnings ......................................................................................................... 6.5
Error messages .................................................................................................................................... 6.8
APPENDIX
Basic specifications .........................................................................................................A.2
Specification for ink ......................................................................................................... A.4
Position of the warning label ........................................................................................... A.5
Function Flowchart .......................................................................................................... A.7
To Next Page
Loading...
