- 5.8 -
8. Push the [ENTER] key.
[SCAN COUNT] is displayed.
9. Push the [ ] or [ ] key until the display gives
the indication [TEMP.DIFF.].
10. Push the [ENTER] key.
11. Click on the jog keys,[
] or [ ] to select the
number of the scanning for the regular wiping.
• INT.WIPING function is effective in case the
outside temperature is lower than the print
heater temperature setting, and the temperature
difference exceeds the value of “TEMP.DIFF.”.
12. Push the [ENTER] key.
[TEMP.DIFF.] is displayed.
13. Push the [END] key.
[INT. WIPING] is displayed.
14. Push the [END] key twice, and return to the
LOCAL mode.
MAINTENANCE
INT.WIPING < ent >
INT.WIPING
SCAN COUNT < ent >
INT.WIPING
TEMP.DIFF. < ent >
INT.WIPING
TEMP.DIFF. = 25 ° C
INT.WIPING
TEMP.DIFF. < ent >
INT.WIPING
TEMP.DIFF. = 20 ° C
< LOCAL >
To Next Page
Loading...
