Color Inkjet Printer JV33-130/160
1-6
Perpendicularity ± 0.5 mm/1000 mm
Media skew 5 mm or less /10 m
Print gap 2.0 mm or 3.0 mm (from the platen surface). 2 level adjustment.
Media heater PRE/PRINT/AFTER (3-system independent control)
Media cutting Cutting in the Y direction with a tool on the head
Cutting accuracy (step height) less than 0.5mm
Cutting tool is a consumable
Waste ink tank Bottle type (2000cc)
Interface Standard equip-
ment
USB2.0 *Cables are maintenance supplies.
Command MRL-III
Noise At standby Less than 58dB (FAST-A, back and forth and around 1m)
Continuous Less than 65dB
Temporal Less than 70dB
Compatible specification VCCI Class A
FCC Class A
UL 60950
CE Marking (EMC Directive, Low Voltage Directive)
CB Report
RoHS Compliant
Power source specifications Single-phase AC 100V ~ 120V ± 10%, 220V ~ 240V ± 10%
Lower than 15A 50/60Hz ± 1Hz
With the sleep function
Power consumption Lower than 1440VA Main body including heater
Excluding optional devices
Environment Operating tem-
perature limit
20 °C~35 °C Ink discharge stability declines in an
environment out of the range listed in
the left.
Relative humid-
ity
35~65%Rh (non condensing)
Accuracy assur-
ance tempera-
ture
20 °C~25 °C
Temperature
gradient
Less than ± 10 °C/h
Dust Equivalent to office environment
Weight Main body Less than 145 kg Less than 160 kg
Outside dimen-
sion
(W) 2289 mm 2538 mm
(D) 739 mm 739 mm
(H) 1424 mm 1424 mm
Item
Specifications
Notice
JV33-130 JV33-160
To Next Page
Loading...
