Color Inkjet Printer JV33-130/160
2-8
Device configuration
The device configuration of ink supply path is shown below.
The firmware switches select whether the inkset configured at the initial filling is 4-color or not.
4-color filling
2 paths of the same color are linked directly after the cartridge valve. Normally the valve of 1 cartridge
per color is opened by toggle switching, supplying ink to a 2-nozzle row. Thereafter, the cartridge on
the side with the open valve is referred to as the control cartridge, while the other is referred to as the
sub cartridge.
Fig.2-1 Ink Supply Path Diagrammatic Illustration (4-Color Filling)
Except for 4-color filling
Since 1 cartridge is linked to 1 nozzle, toggle switching is not used, and all cartridges are control
cartridges.
Fig.2-2 Ink Supply Path Diagrammatic Illustration (6-Color Filling)
Fig.2-3 Ink Supply Path Diagrammatic Illustration (6-Color+white Filling) *Only when loaded with SS21
To Next Page
Loading...
