MIMAKI JV33-160 - Page 90

Color Inkjet Printer JV33-130/160
3-20
Upload Parameters
1 Start JV33 with parameter Up/Down
load Mode.
Turn the power ON with pressing []+[].
2 Start FWUpdateTool3.
Connect the PC and JV33 by USB cable, and
run the FWUpdateTool3.
3 Select the interface in the [Upload] tab
of the FW Update Tool III screen.
In [Device] section, check the interface con-
necting printer.
4 Select [JV33.PRM] in the [PRM File]
list, then execute [Upload!!].
5 The screen in the diagram on the right is
shown during uploading.
Click [Abort] button to cancel.
Up/Down load mode
Power ON
Up & Down load Ready!
?
?
?
?
***UPLOADING***
PC
JV33