Color Inkjet Printer JV33-130/160
3-24
5
Enter the test conditions and execute “Y
MOVING ADJUST”.
Input the following conditions.
Speed (S) : 5 ~ 10 mm/s
Acceleration (A) : 1.0 G
Length (X) : approx. 50 ~ 100 mm
6
Adjust the value to minimize the hunt-
ing sound when the Y-axis motor is
driven.
Check the noise of Y-axis motor at the right
back side of JV33.
* Input values with targeting 130~160. (Input
range 0~255)
7
Press [END] several times to finish the Y-axis motor current adjustment.
#MOTOR CURRENT
Y MOVING ADJUST<ent>
#Y MOVING ADJ.
S=*** A=*** X=****
Y axis consecutive
driving
(Y axis motor driving)
#Y MOVING ADJ. *RUN*
XXX (****)
[]/[] : CV
[]/[] : MOVE
[ENTER] : Exec
[END] : Return
(Carriage out)
[]/[] : Change adjust
value
[END] : Store adjust value
and end
To Next Page
Loading...
