MIMAKI UJV100-160 - Ink leakage occurs.; The light-blocking cover comes off.

Chapter 5 Dealing with Problems
120
Symptom Corrective action
Vertically uneven color
You can improve this problem by attaching the NITOFLON
®
tape
provided on the platen.
Attach the tape, taking care not to block the vacuum
hole.
For more information, refer to the description on transporting media
on the platen.
https://mimaki.com/download/inkjet.html
Ink leakage occurs.
• If an ink leak occurs, turn off the main power immediately and unplug the power cable. Contact
your local dealer or our service office.
The light-blocking cover comes off.
If the light-blocking cover comes loose, the ink inside the tank may be exposed to light and begin to harden.
If the light-blocking cover comes loose, reattach as follows:
1
Insert the lug on one side of the light-blocking cover into the corresponding hole in the tank.
2
Insert the lug on the other side while pushing in toward the first hole in Step 1.