Chapter 2 Printing
68
• Print speeds may differ for the same image data, depending on the width of the medium
loaded, print origin position, and resolution.
• If an error occurs, the machine switches to LOCAL mode once printing is completed.
Further printing is not possible.
• The ink used in this machine is warmed before printing. Printing is disabled while the ink is
warmed.
Pausing Printing
1
Press [LOCAL] while printing is in progress.
• Printing is paused.
• If data is being sent from a PC, data transmission is paused at the PC.
2
Press [REMOTE].
• Printing resumes.
• No other functions can be used when printing is paused.
Stopping Printing (Data Clear)
1
In LOCAL mode screen, select [DATA CLEAR].
width:1340mm
DATA CLEARADJUST
LOCAL
2
Press the [ENTER] key to clear the received data.
• The receive buffer is cleared.
To Next Page
Loading...
