MIMAKI UJV100-160 - Installing RIP Software; Obtaining Color Profiles

Chapter 1 Before Using This Product
36
• The driver installation guide is provided within the installer.
Installing RIP Software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Install RasterLink.
• The following icon will appear on the PC desktop once the software is installed.
• For more information, refer to the RasterLink installation guide.
https://mimaki.com/download/software.html
• Once this is installed, activate the license for . Otherwise, “Profile Update” will not start.
Obtaining Color Profiles
Print quality (e.g., tone, bleeding) will vary depending on the media and ink set. To maintain consistent print
quality, select a color profile that suits the media and ink set.
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Launch “Profile Update”.
(1) From the Start menu, select [Mimaki RasterLink6Plus] > [Profile Update].
(2) Click [Next].
2
Select the UJV100-160 being used.
• Select the check box for the ink set and ink type being used, then click [Next].
• Expanding the [+] button allows selection of the ink type.