Chapter 2 Printing
48
2.1 Print Process
1.
Turn on the power.
"Turning On the Power"(P. 30)
2.
Connect a RIP PC to the machine.
"Using a USB 2.0 Interface Cable"(P. 33)
"Using a LAN Cable"(P. 33)
3.
Set up the RIP software.
"Installing RIP Software"(P. 36) (required first time only)
"Obtaining Color Profiles"(P. 36)
"Setting Up RIP Software"(P. 37) (required first time only)
4.
Adjust print head height.
Adjust the height adjustment lever to suit the medium. "Adjusting Print Head Height"(P. 51)
Height adjustment lever
Hi
Low
5.
Load the media.
To Next Page
Loading...
