Chapter 6 Appendix
130
6.1 Specifications
Item Details
Print head Type Drop-on-demand piezoelectric print heads
Specifications Two staggered heads with 420 nozzles ×4 rows each
Resolution Y: 360 dpi, 720 dpi, 1,200 dpi
X: 900 dpi, 1,200 dpi
Ink set 4-color C, M, Y, K
4-color, W C, M, Y, K, W
4-color, W, CL C, M, Y, K, W, CL
Media Type Label paper (paper base), PVC sheet (not more than 0.25 mm in
thickness, including laminating layer), fluorescent sheet, reflective
sheet (excluding high-luminosity reflective sheet)
Maximum printing width
*1
1,610 mm
Maximum width 1,620 mm
Minimum width 210 mm
Thickness Max. 1.0 mm
Roll external diameter
*2
Max. 250 mm (paper media), max. 210 mm (other media)
Roll weight
*2, *3
Max. 45 kg
Core internal diameter
*4
2 inches or 3 inches
Printing face Exterior/interior
Roll end Taped or loosely affixed to core
Print
margins
Left/right 15.0 mm (default), minimum: Left/right 5 mm
Top end 120 mm
Bottom end 150 mm
Distance
accuracy
*5
Absolute accuracy ±0.3 mm or ±0.3 % of specified distance, whichever is greater
Duplicability ±0.2 mm or ±0.1% of specified distance, whichever is greater
Perpendicularity ±0.5 mm/1,000 mm
Media skew Not more than 5 mm/10 m
Printing gap Manual, two settings (2.0, 2.5 mm)
Media cutting Cutting precision (steps): Not more than 0.5 mm
Origin alignment Visually
Ink supply Ink bottle
Washing liquid feed N/A
Waste ink tank Bottle type (2,000 ml)
Take-up units Selectable inside/outside winding
Media heater N/A
NCU (Nozzle clogging detection) Provided
UV unit Air-cooled LED UV emitters x2
Image buffer SD-RAM: 1 GB
To Next Page
Loading...
