Chapter 6 Appendix
131
Item Details
Interface Data transfer function USB 2.0 Hi-speed, Ethernet 1,000BASE-T
Email function Ethernet 10BASE-T/100BASE-TX/1000BASE-T
Commands MRL-V
Languages English, Japanese, Chinese
Noise
levels
At standby Not more than 58 dB (FAST-A, 1 m on all sides)
Continuous operation Not more than 65 dB
Non-continuous
operation
Not more than 75 dB
Compliance with standards VCCI Class A, FCC Class A, IEC 62368-1 ETL compliance, CE
marking (EMC Directive, Low Voltage Directive, Machinery
Directive), CB certified, RoHS, REACH, EnergyStar, EAC
marking, RCM marking
Power supply specifications
*6
Single-phase 100 to 120 V AC ±10 %/12 A, single-phase 200 to
240 V AC ±10 %/8 A, 50/60 Hz ±1 Hz
Power
consumptio
n
Normal printing Max. 500 W
Sleep Max. 4.5 W
Installation
environmen
t
*7
Permissible ambient
temperature
20 to 30 °C
Relative humidity 35 to 65 %RH (no condensation)
Temperature range in
which accuracy is
guaranteed
20 to 25°C
Temperature gradient Not more than ±10 °C/h
Dust
0.15 mg/m
3
(typical office)
Maximum operating
altitude
2,000 m
External
dimensions
Width
*8
2,775 mm (xxxx mm)
Depth
*8
700 mm (xxx mm)
Height
*8, *9
1,475 mm (xxxx mm)
Weight
*8
167 kg (214 kg)
1. Setup menu margins set to the minimum (5 mm) on either side
2. External diameter and weight after winding media
3. Free of sagging due to weight
4. 3 inch only for high-speed printing
5. Excluding media size variation and fluctuations at initial loading
6. Excluding options
7. Ink printing consistency will decrease in conditions outside this range.
8. The figures in parentheses indicate package dimensions.
9. Excluding ink bottle height
6
To Next Page
Loading...
