Chapter 5 Dealing with Problems
123
Message Cause Corrective action
2. Turn off the power on the machine and turn
it on after a while. "Turning Off the
Power"(P. 31)
3. Replace with new ink. "When Ink End is
Displayed"(P. 39)
Ink Color
• A different ink color is
registered on the ink IC chip.
• Insert an ink IC chip for the correct ink color.
Insert Ink IC Chip
Ink Type
• A different ink type is
registered on the ink IC chip.
• Insert an ink IC chip for the correct ink type.
Insert Ink IC Chip
Expiration
• The ink has expired. • Replace with new ink or use up as quickly
as possible. Printing is possible. "When
Ink End is Displayed"(P. 39)
Expiration:1MONTH
• The ink is one month past its
expiration date and cannot
be used.
• Replace with new ink or use up as quickly
as possible. Printing is possible. "When
Ink End is Displayed"(P. 39)
Expiration:2MONTH
• The ink is two months past
its expiration date and
cannot be used.
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 39)
Messages displayed on the ink IC chip registration screen
Message Cause Corrective action
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
• The ink expiration date is
approaching.
• Use the ink before the expiration period.
Registered IC chip
• The ink IC chip inserted is
already registered.
• Replace with a new ink IC chip. Insert Ink IC
Chip
Unable to register.
The registration limit was
exceeded.
• More than one was
registered for each slot.
• Use up the equivalent of one bottle before
registering.
Unable to register.
XXXXXXX (Error name)
• The ink IC chip could not be
registered due to an error.
• Insert the correct ink IC chip. Insert Ink IC
Chip
Ink Expiration Over
• The ink is two months past
its expiration date and
cannot be used.
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 39)
Ink type
• A different ink type is
registered on the ink IC chip.
• Insert an ink IC chip for the correct ink type.
Insert Ink IC Chip
Ink Color
• A different ink type is
registered on the ink IC chip.
• Insert an ink IC chip for the correct ink color.
Insert Ink IC Chip
WRONG INK IC
• An error occurred with the
information on the ink IC
chip.
1. Check to confirm the ink IC chip was
inserted correctly. Insert Ink IC Chip
2. Turn off the main power and wait a while
before turning back on. "Turning Off the
Power"(P. 31)
3. Replace with new ink. "When Ink End is
Displayed"(P. 39)
Replace Ink Bottle
• The ink IC chip was
registered when an ink end
or ink near-end error
occurred.
• Mount a new ink bottle and register the ink
IC chip.
5
To Next Page
Loading...
