Chapter 1 Before Using This Product
23
Pinch Rollers and Grid Rollers
The pinch rollers and grid rollers are used to grip and feed the media.
• When this product is not in use, raise the clamp lever to separate the pinch rollers from the grid
rollers. If the pinch rollers are left in the lowered position for an extended period of time, they
may become deformed, possibly preventing the media from being fed correctly.
• Attach the clamp changeover sliders to the pinch rollers at the left and right-hand ends of the
media. The pinch rollers can be raised by attaching clamp changeover sliders. This prevents
gripping the left and right-hand ends of the media for consistent feeding.
Media Sensor
The media sensor detects the presence/absence of media.
• The sensor must be covered by the media to detect the media width.
1
To Next Page
Loading...
