Chapter 2 Printing
61
2.5 Head Cleaning
The following head cleaning methods are available: Choose the method based on test results.
Item Details
Soft If the print shows a bent line (deflection)
Normal If the print shows a missing line (nozzle clogging).
Hard If soft cleaning and normal cleaning fail to resolve print defects (e.g., nozzle clogging,
deflection)
• The ink used in this machine is warmed before printing. The machine is inoperable while the ink
is warmed.
1
In LOCAL mode screen, select [TEST PRINT/CLEANING] > [Cleaning], then press the [ENTER]
key.
• The Cleaning menu is displayed.
2
Select the cleaning type, then press the [ENTER] key.
3
Select the Head to clean and press the [ENTER] key.
• Check the check box. Heads with checked check boxes will be cleaned.
4
Run another test print and check the print results.
• Repeat the cleaning and test printing process until the print results appear normal.
• Do the following if head cleaning fails to resolve the print defects (e.g., nozzle clogging,
deflection).
"Wiper Cleaning"(P. 88)
"Cap Cleaning"(P. 89)
"Print Head Nozzle Washing"(P. 93)
2
To Next Page
Loading...
