MIMAKI UJV100-160 - Part Names and Functions

Chapter 1 Before Using This Product
20
1.1 Part Names and Functions
Front
1
2
3
5
8
4
6
7
9
10
11
No. Name Summary
1 Platen Print area. "Platen"(P. 22)
2 Pinch rollers
Grid rollers
The pinch rollers and grid rollers are used to grip and feed the media.
"Pinch Rollers and Grid Rollers"(P. 23)
3 Capping station Includes caps, wipers, and an NCU for monitoring print head nozzle
conditions. "Capping station"(P. 22)
4 Carriage Consists of a print head, a UV-LED lamp, the jam sensor, and the media
cutter. "Carriage"(P. 22)
5 Operating panel Includes operating keys and displays indicating various settings and other
items. "Operating Panel"(P. 26)
6 Clamp lever (front) Lowering the clamp lever secures the media. Raising the clamp lever
releases the media.
7 Waste ink tank Container for waste ink. "Waste Ink Tank Replacement"(P. 108)
8 Take-up unit Automatically rolls up the roll media after printing. "Take-up Unit"(P. 24)
9 Maintenance covers Open the cover to perform maintenance. Printing and automatic
maintenance is not possible while the covers are open.
10 Ink wipe filter Filter for soaking up ink droplets from special ink bottle caps
11 Ink supply unit The ink bottle is inserted here to supply ink to the print head. "Ink
Replacement Method"(P. 39)