MIMAKI UJV100-160 - Page 66

Chapter 2 Printing
66
3
Select the image data imported.
• The image is displayed in the tab for UJV100-160 selected in “Printer name”.
4
Check the settings and alter as necessary.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(normal printing): Specifies settings like enlargement/reduction and number of copies.
(print conditions): Selects a color profile for the media and ink set loaded in this machine.
• For more information, refer to the RasterLink reference guide.
https://mimaki.com/download/software.html
5
Print image data.
• Click (execute) from the function icons on the right-hand side of the screen. Select
“Immediate Print” or “RIP and Print”, then click [Start].
• Media width must be reacquired after replacing media.
(1) Select the tab for UJV100-160 in the main window.
(2) Click (display latest printer status) in the Printer tab.