MIMAKI UJV100-160 - Page 77

Chapter 3 Settings
77
5
Select “Print Start”, then press the [ENTER].
• Print a nozzle recovery pattern.
• The Select Entry Nozzle screen appears once printing is complete.
100 0102030405060708090
H1-D K
H1-C Y
H1-B C
H1-A M
1
101
201
301
401
510 0
No.203
H1-A M
Ink color
Nozzle row number
Head number
Approx. 300
mm
Approx. 180
mm
6
Select the “head number and nozzle row” for nozzle recovery, then press the [ENTER] key.
SELECT ENTRY NOZZLE
Head1-A
>
> Head1-B
>
Head1-C
>
Head1-D
>><<
>
Head2-A
Head number
Nozzle row number
7
Enter the “nozzle number” for nozzle recovery, then press the [ENTER] key.
• Select the entry number before entering the nozzle number.
• Nozzle recovery is set.
Head2-D
No.1
No.2
16
128
No.3
184
No.4
OFF
No.5
OFF
>><<
Entry number 1 to 10
Nozzle number
8
Press the [ENTER] key once entry is complete.
• Select [Maintenance] > [Nozzle Recovery] > [Test Print], then select “ON” to perform
nozzle recovery and test printing.
"Test Printing"(P. 59)
Checking whether nozzle recovery is set correctly
1
Load the media.
2
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
3