MIMAKI UJV100-160 - Page 80

Chapter 3 Settings
80
3
Press the [ENTER] key.
• The transmission results are displayed.
• An error code will be displayed if the test email transmission is unsuccessful. Refer to the error
code list and take appropriate action.
㼀㼞㼍㼚㼟㼙㼕㼠㻌㼀㼑㼟㼠
㻲㼍㼕㼘㼑㼐䚷䚷䠖㻌㻌㻝㻌㻞㻌㻟㻌㻠㻌㻡
Error code
• Emails may not necessarily be delivered even if they have been sent. Check the terminal
receiving the email for spam email filters.
• For more information on server settings or other topics, contact your network administrator
or service provider.
4
Press the [ENTER] key once the test is complete.
l
Error Code List
Error code Likely cause Corrective action
10 Network connection error
• Check to confirm that this machine is connected to a network.
• Check the IP address for this machine.
• Check if the network setup allows this machine to use DNS.
20 No valid email address
• Enter a valid email address.
11003
11004
No POP server was found
or the DNS server could not
be accessed.
• Check the POP server address.
• Check if the network setup allows this machine to use DNS.
11021 Unable to connect to POP
server
• Check the POP server settings.
• Check the firewall settings.
12010 An error was returned from
the POP server.
• Check the POP server settings.
13000 POP authentication failed
• Check the user name and password.
• Check the APOP settings.
• Check the authentication method.
10013
10014
No SMTP server could be
found or the DNS server
could not be accessed.
• Check the SMTP server address.
• Check if the network setup allows this machine to use DNS.
10021 Unable to connect to SMTP
server
• Check the SMTP server settings.
• Check the SMTP port number.
• Check the firewall settings.
10***
11***
20***
21***
An error was returned from
the SMTP server or there
was no response.
• Check the SMTP server settings.
• Communication is not possible with a server that requires SSL
communication.
• Check the protocol filter settings.
12*** The sender email address is
invalid.
• Set an email address corresponding to the server account.
13*** The email recipient could be
found or the email address
is invalid.
• Check the email address.
• This error may not always be detected even if the email
address is incorrect.
• Set an email address corresponding to the server account.
22000
22008
SMTP authentication error
• Check the authentication method.