Mindray BeneVision N17 - Selecting Rso 2 Parameters for Display

31 - 6 BeneVision N Series Patient Monitor Operator’s Manual
NOTE
• Set the rSO
2
value measured when patient is sober and eupraxic as baseline. The baseline will be set
automatically if it is not set within 5 to 6 minutes and current rSO
2
value is effective.
31.7.6 Selecting rSO
2
Parameters for Display
In the rSO
2
numeric area, rSO
2
and SSI are permanently displayed parameters, and other parameters are
selectable. To select the parameters for display, follow this procedure:
1. Select the rSO
2
numeric area to enter the rSO2 menu.
2. Select the Select Parameter tab.
3. Select the parameters for display.