Mindray BeneVision N17 - User Maintenance Settings; Accessing the Maintenance Menu; The Device Location Settings

BeneVision N Series Patient Monitor Operator’s Manual 39 - 1
39 User Maintenance Settings
User maintenance enables you to customize your equipment to best meet your needs. Accessing the
Maintenance menu is password protected.
This chapter describes the settings and functions in the Maintenance menu.
CAUTION
• The maintenance settings can only be changed by authorized personnel. Contact your department
manager or biomedical engineering department for the passwords used at your facility.
39.1 Accessing the Maintenance Menu
To perform user maintenance, follow this procedure:
1. Select the Main Menu quick key → from the System column select Maintenance → input the required
password → select .
2. Select desired tab.
39.2 The Device Location Settings
NOTE
• If Location is set to Unfixed, Bed No. and Room No. are cleared each time you discharge a patient.
Menu Item Default Setting Description
Monitor Name / /
Facility
Department
Location Fixed •
Fixed: the Patient Management dialog
displays Bed No. and Room No., but you
cannot change them.
•
Unfixed: you can change Bed No. and Room
No. from the
Patient Management dialog.
Room No. / /
Bed No.