Mindray BeneVision N17 - The Display Settings; The Print Settings; The Printer Tab

BeneVision N Series Patient Monitor Operator’s Manual 39 - 11
39.8 The Display Settings
39.9 The Print Settings
39.9.1 The Printer Tab
Menu Item Default Setting Function
D22/D19
(for N22/N19)
On On: you can only use Mindray secondary display.
Off: you can use display of the third party as the secondary
display
Screen Contents Independent •
Mirrored (for N22/N19): The contents of the secondary display
is exactly the same with the primary display. The orientation of
the secondary display is also the same with the primary
display.
•
Independent: You can separately configure the contents and
layout of the primary display and secondary display. The
independent secondary display cannot share the mouse and
keyboard with the primary display. For N22/N19, separate
mouse and keyboard connected to the MSB connectors of the
secondary display is required.
•
Extended: You can separately configure the contents and
layout of the primary display and secondary display. The
extended secondary display shares the mouse and keyboard
with the primary display. You cannot use separate mouse and
keyboard to operate the extend secondary display.
Secondary Screen Location / For extended secondary display, selects the layout of primary
display and secondary displays. That is to say, the position of
secondary display relative to the primary display.
Alarm Sound/Light
(for N22/N19)
Off Selects whether the secondary display presents alarm light and
alarm sound.
Menu Item Default Setting Description
Connection Type Printer Selects you want to output patient reports via
the print server or a network printer.
Printer IP Address 0.0.0.0 For printer only.
Paper Size A4
Printer Resolution 300 dpi
Print Server Address
/ For print server only.
If the CMS is used as the printer server, set the
Port to 6603.
Print Server IP Address
/
Port 6603
General Report
(For print server only.)
Print Action Paper Selects the media of the reports.
Printer / Selects the default printer (for paper report
only).
Printer Resolution / Selects the resolution for the default printer (for
paper report only).
PDF Resolution 600 dpi Selects the resolution for the default printer (for
PDF report only).