Mindray DC-70 Exp User Manual

3-24 System Installation
3.5.10 Importing the configuration file after the HDD is
replaced
After replacing the HDD of the DC-70 V4.0 series, it is required to import the configuration file to
enter the ultrasound application at the first time powerup. The steps are as follows.
1. Before replacing the HDD, contact Mindray service engineer to download the configuration file
from Mindray's internal platform.
2. On a computer, unzip the file obtained from Mindray to a USB flash drive and confirm the
“Config.key” file is included.
3. After replacing the HDD, Insert the USB flash drive into a USB port on the device. The system
will prompt to import the product configuration file on startup.
4. Click [Import Config], browse the USB drive and select the “Config.key” file, then click [OK] to
import. After the file has been successfully imported, a message will be displayed on the
screen.

Mindray DC-70 Exp Specifications

General

Touch Screen Size	10.4 inch
Probe Ports	4
Power Supply	100-240V AC, 50/60Hz
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Cardiac, OB/GYN, Vascular
Weight	85 kg
Doppler Modes	PW, CW, Color Doppler, Power Doppler
Imaging Modes	2D, M-Mode, 4D
Storage	500GB hard drive