Mindray DC-70 Pro User Manual

C-20 Description of Self Test Items
If the flicking works well, the program passes, and then exits the test.If the flicking fails to work,
click “Touch Screen is Bad”.
 Analysis to test failure
The touch screen does not work if the test result is FAIL.
 Suggestion to failure test
Confirm the drive of the touch screen is installed properly.
Then confirm whether connecting material between the touch screen and main unit is fixed well.
It is recommended to replace touch screen.
C.1.39 Mini CW Board ID Test
 Top test item
DSP FPGA and TRA FPGA communication self test (control interface)
 Test content
The program reads the signal in the place to decide whether mini CW board is in the place. Then,
read CW board’s ID. SPI interface communication between TRA board and mini CW board works
well if it appears non-0 and non-F.
 Analysis to test failure
The drive goes wrong if the test result appears Error.

Mindray DC-70 Pro Specifications

General

Touch Screen	Yes
Touch Panel	Yes
Transducer Ports	4
Battery Backup	Yes
3D/4D Imaging	Yes
Operating System	Windows-based
Power Supply	100-240V AC, 50/60 Hz
Storage	500GB HDD
Connectivity	USB, HDMI
Applications	Cardiology, Obstetrics, Gynecology
Imaging Modes	Color Doppler, Power Doppler
Ports	USB, Ethernet, HDMI
Display Size	19 inch