Mindray DC-80A - Check System Information

3-24 System Installation
The DICOM Service Setting is used to set properties of DICOM services as Storage, Print, Worklist,
MPPS, Storage Commitment and Query/ Retrieve. The detailed information please refer to DICOM
chapter in the operator’s manual [Basic Volume].
NOTE:
Only if DICOM basic option is configured, Worklist page is available.
3.5.9 Check System Information
In System Information screen, it displays the product configuration, the optional installation status,
software version, hardware & boards, and driver related information. You can check the product
information here.
1. Press <Setup>, and then click [About] to open the following screen.
2. Log in service account. Enter About Detail page, and system hardware and board related
information is displayed.
NOTE:
1.
Be sure to confirm the system information before and after the software
maintenance.
2.
If necessary, please ask the user to save the current system information.