Mindray DC-80A Service Manual

Care and Maintenance 12-3
12.2 Cleaning
12.2.1 System Cleaning
12.2.1.1 Cleaning Flow
Clean dust-proof covers
Clean monitor and touch screen
Clean trackball
Clean holders
Clean cover
Clean probes
Clean control and minor panel
Power off and pull out the
power cables
Fig 12-1 The View of Cleaning Maintenance
WARNING:
Before cleaning the system, be sure to turn off the power and
disconnect the power cord from the outlet. If you clean the system
while the power is “On”, it may result in electric shock.
12.2.1.2 Procedures
1. Dust-proof cover cleaning
Including dust-proof mesh of the trolley and dust-proof mesh of probe socket.
◼ Tool: soft brush
◼ Method:
a) Remove dust-proof mesh/cover before cleaning.
Two dust-proof meshes on the right of the system: release the clasps of the meshes to
arrow’s direction. Pull the dust-proof meshes towards the front of the trolley to let the
meshes fall off. Then, remove the dust-proof meshes.

Mindray DC-80A Specifications

General

Brand	Mindray
Model	DC-80A
Category	Diagnostic Equipment
Language	English