5-34 Image Optimization
Tissue Velocity M Imaging (TVM): This function assists to observe the cardiac
motion through a direct angle. TVM mode is also called Color Tissue M mode,
refer to "5.10 Color M Mode" for details.
Only phased probe is valid for TDI function.
5.9.1 TDI Exam Protocol
Enter TDI
User-defined shortcut key
a) Assign a user-defined shortcut key for TDI: the setting path is "[Setup] →
[System Preset] → [Key Config]". Please refer to "15.1.7 Key Config” for
details.
b) Press the user-defined key in B mode to enter TVI mode.
In real-time mode, click [TDI] in the soft menu or menu to enter the corresponding
TDI mode as follows:
In Color mode, click [TDI] to enter TVI mode, parameters of TVI mode will be
displayed in the soft menu.
In Power mode, click [TDI] to enter TEI mode, parameters of TEI mode will
be displayed in the soft menu.
In PW mode, click [TDI] to enter TVD mode, parameters of TVD mode will be
displayed in the soft menu.
In M mode, click [TDI] to enter TVM mode, parameters of TVM mode will be
displayed in the soft menu.
Switching between the TDI modes
In
TDI mode, pres
s <Color>
, <Power>,
<M> or <
PW> to switch bet
ween the m
odes.
Exit TDI
Click [TDI] or press the user-defined key to exit TDI mode and enter general
imaging modes.
Or, press <B> on the control panel to return to B mode.
As in TDI mode, [TDI] item in the soft menu is the pathway for entering and exiting TDI
mode, you can preset its performance through the path "[Setup] → [Image Preset] →
[Menu Preset]".
To Next Page
Loading...
Need help?
General
