Mindray M7 User Manual

15-2 Setup
 General buttons
 [OK]: click to confirm the setting, exit the current page and then return to the
previous page.
 [Cancel]: click to give up the setting, exit the current page and then return to the
previous page.
 [Load Factory]: click [Load Factory], and all parameter settings will be restored to
the original factory default.
15.1 System Preset
Click [System Preset] on the Setup menu to open the following page:
Page Description
Region
To set the hospital name, language, time zone, time format, system
date/time, logo and so on.
General
To set patient information, exam setup, patient management, storage,
system dormancy, operation log and so on.
Image Preset To set some general parameters in imaging modes.
Meas To set the measure ruler, measure result, units and so on.
OB
To set the relevant information about fetal gestational age, fetal growth
formula and fetal weight.
Comment To set general information about comment.
Key Config To assign functions to footswitch and <Print>, <Save>, <F1> ~<F6>.

Mindray M7 Specifications

General

Type	Portable Ultrasound System
Display	15-inch LCD
Imaging Modes	2D, M-mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Cardiac, Vascular, OB/GYN, Small Parts, Musculoskeletal, Urology, Pediatric
Battery	Rechargeable Lithium-ion
Connectivity	USB, Ethernet, DICOM
Dimensions	35 cm x 36 cm x 9 cm
Transducer Ports	2 active transducer ports