Mindray M8 User Manual

C-8 Description of Self-test Test Items
Read TEE angle value. If it is not 0 or FF, TEE angle signal is normal.
 Analysis to Test Failure
The drive goes wrong if the test result appears Error.
If test result is FAIL, then TEE angle signal collecting link has a malfunction.
 Suggestion to Test Failure
a) Restart the device to perform the self test if the test result appears Error. It is
necessary to restore the device if Error re-appears.
b) It is recommended to change main board if the test result is FAIL.
C.1.20 Z0301 DSP FPGA and TRB Interconnection Test
(Control Interface)
 Top test items
PC Module and DSP FPGA Interconnection Test
 Test content
Test whether the XCVER control bus communication between DSP FPGA and TRB
FPGA works well via reading the registering.
 Analysis to test failure
The drive goes wrong if the test result appears Error.
The connection error between DSP FPGA and TRB FPGA occurs if the test fails.
 Suggestion to failure test
a) Restart the device and perform the self-test if the test result appears Error. It is
necessary to restore the device if Error re-appears.
b) It is recommended to replace TR64 board if the test result is FAIL.
C.1.21 Z0302 TRB AFE SPI Interface Test
 Top test items
DSP FPGA and TRB Interconnection Test (Control Interface)
 Test content
Test whether the
SPI control bus communication between TRA FPGA and AFE
works well via reading the registering.
 Analysis to test failure
The drive goes wrong if the test result appears Error.
TRA FPGA and AFE’s SPI have communication error if the test result is FAIL.
 Suggestion to failure test
a) Restart the device and perform the self-test if the test result appears Error. It is
necessary to restore the device if Error re-appears.
b) It is recommended to replace TR64 board if the test result is FAIL.

Mindray M8 Specifications

General

Brand	Mindray
Model	M8
Category	Medical Equipment
Language	English