Checking Performance and Functions 5-7
Persistence
menu-[Persistence].
The system provides 7 level of persistence. The bigger the value
is the stronger the effect becomes.
Rotation/Invert
B image soft menu-[L/R
Flip]/[U/D Flip].
To invert the image horizontally or vertically.
Image can be rotated by the angle of 0°, 90°, 180° and 270°.
When the image is rotated in the angle of 90° or 270°, the depth
scale is displayed on the upper part of the screen.
The “M” mark indicates the direction of the image; the M mark is
located on the top of the imaging area by default.
iBeam
B image soft menu-[iBeam].
The system provides 4 values of iBeam in B mode. iBeam is
disabled when it is off.
Auto Merge
B image soft menu-[Auto
Merge].
In the Dual-split mode, when the images of the two windows have
the same probe type, depth, invert status, rotation status and
magnification factor, the system will merge the two images so as
to extend the field of vision.
Turn on or off the function through the [Auto Merge] item in the
soft menu;
Gray Map
B image soft menu-[Gray Map]
Adjust the gray from [Gray Map] on the soft menu;
There are 8 different maps available.
Tint Map
B image soft menu-[Tint Map]
Select the tint map from [Tint Map] on the soft menu.
Turn on or off the tint map from [Tint Map] on the soft menu.
TSI
B image soft menu-[TSI].
Select TSI from [TSI] on the soft menu.
The system provided 4 ways of optimization for specific tissues:
general, muscle, fluid and fat.
iTouch
Press <iTouch> button
Press <iTouch> on the control panel to enter the iTouch status, the
symbol of which will be displayed in the image parameter area of
the screen.
Click [iTouch] on the image menu to adjust the gain in iTouch
status among -12 through 12dB.
Long press <iTouch> to exit iTouch mode.
HScale
B image soft menu-[HScale]
Click [HScale] on the menu to display or hide the scale (HScale).
Dual live
B image soft menu-[Dual live].
Enable [Dual Live] on soft menu, and dual-split window of images
are displayed on the screen.
Two pages of adjustable parameters are displayed on the touch
screen as well; where, shared parameters and left window
parameters are displayed on the B(L) page, while right window
parameters are displayed on the B(R) page.
Switch the display mode via <Switch Mode> and adjust the image
parameters.
To Next Page
Loading...
Need help?
General
