4-15
Maintenance and Test Report
(See the above sections for detailed test procedures and contents)
Customer name
Customer address
Servicing person
Servicing company
Equipment under test
(EUT)
Model of EUT
SN of EUT
Hardware version
Software Version
Test equipment Model/No. Effective date of calibration
Test Contents Test Record
Test Result
(Pass/Fail)
Visual Inspection
The case, display screen, buttons, knob, power cord, wall
mount, and accessories have no obvious signs of damage.
The external connecting cables are not frayed and the
connector pins are not loose and bent.
The external connectors are not loose or their pins are not
bent.
The safety labels and data plate are clearly legible.
Power-on test
The power-on test is passed. The power indicator and alarm
system work correctly and the monitor start up properly.
Performance test
SpO
2
test
Measure SpO
2
on a healthy person’s finger and a Pleth wave
and PR value are displayed. The displayed SpO
2
value is
within 95% and 100%.
NIBP test
To Next Page
Loading...
