6. Operating | 6.2 - Configuration and adjustment via the keypad | 112
[Zerotrack step] CP 020 ZEtStP
If a weight change exceeds the adjusted value, automatic tracking does
not function any more.
Setting range for automatic tracking increments: 0.25…10.00d
[Zerotrack time] CP 021 ZEttIM
Time interval for automatic zerotrack.
Input: 0.1…25.0s
At 0.0 s tracking is switched off.
[Overload] CP 022 oVrLd
Weighing range above the max. capacity (Max) without error message.
Input: 0…9999999d
[Minimum weight] CP 023 MIn
Minimum weight at which a print command can be triggered.
Input: 0…9999999d
5. Press "Exit".
6. Save the changes.
To Next Page
Loading...
