13. Safety inspection | 180
13 Safety inspection
Safe operation of the scale (weighing platform/weighing facility + weighing
indicator) is no longer ensured,
– if there is visible damage to the connection cable.
– if the weighing platform/weighing facility and weighing indicator no
longer work.
– after prolonged storage under unfavorable conditions.
– after heavy transport stresses.
Immediately disconnect the defective weighing platform/weighing facility
and weighing indicator from the power supply (pull the power plug out of
the socket) and secure them against further use.
Contact MinebeaIntec customer service.
To Next Page
Loading...
