6. Operating | 6.2 - Configuration and adjustment via the keypad | 98
6.2.2 Date & time
1. Press and hold for 2–3 seconds.
SEtuP appears on the display.
2. Press "OK".
Cd 000 appears on the display (Cd flashes).
3. Press (7×) until dt 068 appears.
4. Press "OK".
YEAr appears on the display.
5. Press "OK".
2014 (YYYY) is displayed.
6. Use / and / to make the necessary changes.
7. Press "OK".
dAtE appears on the display.
8. Press "OK".
12-25 (MM-DD) appears on the display.
9. Use / and / to make the necessary changes.
10. Press "OK".
tIME appears on the display.
11. Press "OK".
17.35 (HH.MM) appears on the display.
12. Use / and / to make the necessary changes.
13. Press "OK".
dt 068 appears on the display.
14. Press "Exit" to exit the menu.
The changes are saved.
To Next Page
Loading...
