Minebea Intec PR 5310 - Profinet I;O Interface

4. Device installation | 4.3 - Hardware construction | 81
4.3.11 ProfiNet I/O interface
The ProfiNet I/O fieldbus is a complete ProfiNet I/O adapter (slave) with CAN
controller.
The interface can be configured by front keys.
Technical data
Description Data
Internal connection
Pin strip,
50‑pin
External connection
2×
RJ‑45
plug connector
Transfer rate 100Mbit/s, full duplex
Protocol ProfiNet I/O
Connection mode Network
Configuration XML file "GSDML-V2.31-Sarto
rius-PR5310-2P-20160807.xml"
Potential isolation yes
Cable type Twisted pairs, screened, e.g., patch cable CAT5
Autolink (straight or crossover)
Cable impedance 150Ω
Cable length to HUB max. 115m
Certificate ProfiBus User organization for HMS Industrial
Networks AB
Certificate no.: Z10006
Report: PN005-1, 12.02.2007