9. Fieldbus interface | 9.2 - Scale protocol | 148
Field Size Function
Write data 4 bytes Data to be written as a binary 32-bit value with
plus or minus sign.
Data type: DINT
Read_Value_Select 1 byte Function for selecting the read request
Write_Value_Select 1 byte Function for selecting the write request
ResPower 1 bit PowerFail is reset.
ResTest
1 bt
The test operating mode is finished.
SetTest 1 bit The test operating mode is started.
Now the test value can be read out by reading
the gross weight.
ResTare 1 bit Tare is reset.
SetTare 1 bit The weighing point is tared.
SetZero 1 bit The weighing point is set to zero.
To Next Page
Loading...
