9. Fieldbus interface | 9.2 - Scale protocol | 163
9.2.5.9 Function number 8–22: weight data (read)
The gross, net, and tare weight are stored as a DINT fix point. The real data
value is derived from DINT and EXPO as follows:
Value
Real
= reading
DINT
× 10
(-EXPO)
Function number 8 Current gross value
Function number 9 Current net value, if tared; otherwise gross
Function number 10 Current tare value, if tared; otherwise 0
Function number 11 Value on the front-panel display
Function number 12 Reserved for internal use.
Function number 13 Reserved for internal use.
Function number 14 Max. capacity (Max)
Function number 15 Reserved for internal use.
Function number 16 Reserved for internal use.
Function number 17 Reserved for internal use.
Function number 18 Reserved for internal use.
Funktionsnummer 19 Reserved for internal use.
Function number 20 Reserved for internal use.
Function number 21 Last printed date (BCD format)
Function number 22 Last printed time (BCD format)
9.2.5.10 Function number 24–29: Limit value (Read/Write)
Function number 24 Limit 1 on
Function number 25 Limit 1 off
Function number 26 Limit 2 on
Function number 27 Limit 2 off
Function number 28 Limit 3 on
Function number 29 Limit 3 off
To Next Page
Loading...
