38
Procedures
3
Press the “ENTER” key.
Zero fine adjustment mode can be entered, then
display of load will show the present load value
and light on and off. At the same time, set the
present load value to “0” with “A/Z A” key or
“A/Z OFF Y” key.
By pressing the key continuously,
increment can be provided continuously.
The variation of load value for one push of
“A/Z A” or “A/Z OFF Y” key is less than
1 digit of display.
Therefore, a few pushes of those keys are
required to get the 1 digit of display value.
“A/Z A” ：Zero fine adjustment
Display Decrement key
“A/Z OFF Y” ：Zero fine adjustment
Display Increment key
4
Press the “ENTER” key.
The indication of load display will show
“T−END”.
Press the “ENTER” key.
After quitting from zero fine adjustment mode,
the load display will show the present load.
To Next Page
Loading...
