4
3. Installation procedures
3−1. Installation place
● Use the instrument where the temperature/humidity specifies within
the range as follows:
Environmental temperature ：−10 ℃ to 50 ℃
Environmental humidity ：Less than 85 %R.H.(Non condensing.)
3−2. Location where installation is not allowed.
Warning ● Don’t locate the instrument on the places such as follows:
It may cause an unexpected faulty in the instrument.
D Don’t expose the instrument in direct sunlight and/or high temperature area.
D Don’t use the instrument in a high humid area.
D Don’t install the instrument where there is high mechanical vibration.
D Don’t use the instrument where there is an excess of dusts and fine particles.
D Don’t install the instrument where there include any corrosive gas or any salty
atmosphere.
D Don’t install the instrument where there is rapid change of temperature and humidity.
D Don’t install the instrument near the devices that are magnetized or generate an
electromagnetic field.
D Don’t install the instrument where there may suffer radioactivity or radioactive rays.
D Avoid the location where chemical reaction may take place such as in a laboratory.
To Next Page
Loading...
