7
Troubleshooting
7-18 Di251/Di351
Finisher FN-109
CAUTION
Danger of burning on metal parts in the finisher!
Metal parts in the finisher can be hot.
Ü Do not touch metal parts in the finisher.
First remove the jammed paperfrom the paper transport section then from
the stapler section of the finisher.
Paper transport section
1
Reachintotherecessedgripatthe
top of the finisher. Pull the finisher
carefully from the copier.
2
Open the Transport Unit Cover. Pull
out the jammed paper found there.
To Next Page
Loading...
