Minolta Di251 - Page 273

Troubleshooting
7
Di251/Di351 7-19
3
Carefully close the cover of the
transport unit.
The transport unit clicks into place
when closed correctly.
4
Open the cover (FN7) on the right
side of the unit.
5
Open the paper misfeed cover
(FN8) on the right side of the unit.
Carefullypullout any paperjammed
there.
6
Close the cover (FN7) on the right
side of the unit.
Stapler section
1
Open the front door (FN4) on the
front of the finisher.
2
Rotate the two paper transport
knobs (FN5) to the right
simultaneously. This will transport
jammed paper out of the staple unit.