Getting to Know Your Copier
2
Di251/Di351 2-17
DANGER
Incorrect handling of the power cable can result in fire and/or
electrical shock!
The copier is equipped with high-voltage components. Incorrect handling
of the copier's power cable may cause damage to the cable. This could
result in fire and/or cause electrical shock. Observe the following safety
precautions to prevent injury and device damage.
Ü Be sure that the power cable is not damaged. If it becomes damaged,
switchoff the copier immediately.Unplug the power cord. Consultyour
technical representative.
Ü Do not pull directly on the power cable itself when unplugging the
power cord from the power outlet.
Ü Do not move the copier unless it is unplugged.
Ü Never place heavy objects on the power cable.
Ü Do not pull or bend the power cable.
Ü Do not place the copier on cables belonging to other devices.
Ü Ensure that no cables of other devices get pinched in the copier.
Ü Be sure that the power cord sits correctly in the power outlet.
Ü Be sure that the power outlet is visible and accessible at all times.
Ü Do not use any extension cords. If you require an extension cord to
connect the copier to a power supply, contact your technical
representative.
Ü Never connect the copier to a multiple-socket extension cord.
Ü Unplug the power cord at least once a year. Clean off any dust that
may have accumulated on or around the contacts.
To Next Page
Loading...
