2
Getting to Know Your Copier
2-18 Di251/Di351
DANGER
Device overheating can result in fire and/or electrical shock!
The copier is equipped with high-voltage components. Incorrect use or
faulty operation of the copier may cause the unit to overheat. Observe the
following safety precautions to prevent injury and device damage.
Ü Switch the copier off immediately if it becomes unusually hot. Unplug
the power cord. Consult your technical representative.
Ü Switch the copier off immediately if smoke comes out of it. Unplug the
power cord. Consult your technical representative.
Ü Switch the copier off immediately if it emits an unusual odor. Unplug
the power cord. Consult your technical representative.
Ü Switch the copier off immediately if it is damaged in any way. Unplug
the power cord. Consult your technical representative.
Ü Always unplug the power cord when the copier is not going to be used
for a long time.
Ü Make sure the ventilation slots on the copier are not covered.
To Next Page
Loading...
