– 10 –
INSTALL THE SOFTWARE
From the START button, select Run…
When the Run dialog box appears,
enter D:driver\english\setup.exe from
the Open drop-down list, then click
on [OK].
• The following dialog box will appear.
5
Click on [Next >].
• The Software License Agreement will appear.
6
After reading the agreement, if you
accept it, click on [Yes].
• The [Serial Number Input] dialog box will
appear.
If you do not accept, click on [No]. Setup will
be cancelled.
7
Enter your name, company name and
the serial number described on the
CD-ROM case and click on [Next >].
• The Choose Destination Location dialog box
will appear.
• Take care to type them correctly, otherwise,
[Next >] cannot be clicked.
8
To Next Page
Loading...
General